F-ONE HM Carbon Foil Mast 16
£1,000.00
F-ONE HM Carbon Foil Mast 16
The goal of this design was to enhance the thrills of foiling. F-one believe foiling is always better when your foil glides better, is easier to drive and reacts better to your demands even at the highest speeds. This is what you will experience when using the F-one HM Carbon Mast 16 on your existing F-one foil or on a new one.
The “16” denotes the 16mm profile. (F-one have also made the F-one HM Carbon Mast 14 which has a 14mm profile available elsewhere our site.)
Available in 80cm and 85cm this mast is ready for all disciplines: KiteFoil, WingFoil, SurfFoil, or SUPFoil but the HM Carbon Mast 16 is geared more specifically for WingFoiling.
The F-one HM Carbon Mast 16 features a 4-bolt integrated base plate at the top (hole spacing: 160 x 90mm standard US Twin Track plate) and an integrated TITAN mast foot at the bottom. It can be connected to virtually all boards on the market featuring the US Twin Track system and can receive all the wings and fuselages that feature the F-one TITAN connection slot.
All components are molded together or bonded in factory to ensure the best rigidity throughout. The mast is all one piece and built in carbon pre-preg with a hollow “spine” structure which is molded and cured in one process. The added High Modulus Carbon fibre layup results in the needed rigidity, both in bending/flexing and torsion/rotation, to fully stay in control and comfortable in all situations and at high speeds.
A carbon mast is a superior piece of gear. It needs to look great and deliver a superior and flawless behavior on the water. The F-one HM Carbon Mast 16 fits the bill, and has raised the bar in terms of performance and control.
Sizes: 80cm and 85cm
Description
F-ONE HM Carbon Foil Mast 16
The goal of this design was to enhance the thrills of foiling. F-one believe foiling is always better when your foil glides better, is easier to drive and reacts better to your demands even at the highest speeds. This is what you will experience when using the F-one HM Carbon Mast 16 on your existing F-one foil or on a new one.
The “16” denotes the 14mm profile. (F-one have also made the F-one HM Carbon Mast 14 which has a 14mm profile available elsewhere our site.)
Available in 80cm and 85cm this mast is ready for all disciplines: KiteFoil, WingFoil, SurfFoil, or SUPFoil but is geared more specifically for WingFoiling.
The F-one HM Carbon Mast 16 features a 4-bolt integrated base plate at the top (hole spacing: 160 x 90mm standard US Twin Track plate) and an integrated TITAN mast foot at the bottom. It can be connected to virtually all boards on the market featuring the US Twin Track system and can receive all the wings and fuselages that feature the F-one TITAN connection slot.
All components are molded together or bonded in factory to ensure the best rigidity throughout. The mast is all one piece and built in carbon pre-preg with a hollow “spine” structure which is molded and cured in one process. The added High Modulus Carbon fibre layup results in the needed rigidity, both in bending/flexing and torsion/rotation, to fully stay in control and comfortable in all situations and at high speeds.
A carbon mast is a superior piece of gear. It needs to look great and deliver a superior and flawless behavior on the water. The F-one HM Carbon Mast 16 fits the bill, and has raised the bar in terms of performance and control. See the Tech Stuff Tab.
Sizes: 80cm and 85cm
TECH STUFF
Pre-Preg Technology
Quality control is much better and so is the working environment for the people building our foils. Pre-preg fabrics offer the lightest weight with the best mechanical properties of carbon fibre.
High Modulus Carbon
The High Modulus Carbon fibre layup is 1.5 times stiffer in flexion and torsion than regular carbon fibre used in other carbon fibre constructions. The percentage of the high modulus fibre has been carefully adjusted in development to obtain the best stiffness in in flex (bending) and torsion (twisting).
Titan connection
The molded in Titan connection enables a very stiff and strong connection between the foot of the mast and the fuselage locking in and reducing movement in all directions. Its format is compact which is very hydrodynamically efficient and very easy to use, assemble and disassemble.
Molded Base Plate
The molded base plate (also known as a top plate) is a 4-bolt plate with a hole spacing of 160mm x 90mm which is known as a US Twin Track plate which is very much becoming if not already, the industry standard fitting.
FAQs
Let us answer some of the frequently asked questions we receive from other customers.
Delivery information
The Watersports Centre are committed to providing great products to you, wherever you are in the world. You can find out more information about our delivery and returns policies below.
Additional information
Mast length for foils | |
---|---|
Version (Year) | 2023 |
Reviews
There are no reviews yet.